Leica LASER ALIGNMENT DIGICAT 100, User Manual

Page: 40 / 210

38 DIGICAT 100/200 The DIGISYSTEM and the DIGICAT
7.9 Wireless Communication

This feature is only available with DIGICAT 200GIS!
General information Data can be wirelessly transferred from the DIGICAT using an integrated radio communca-
tion device. When paired with a suitable computing system, this interface enables system
developers to create a reliable wireless data capture capability, meeting many customer
applications needs.
Typical applications will include buried service surveying, asset mapping and management
reporting systems.
Data output The DIGICAT 200GIS will automatically output product identification and status data when
turned on and then periodically, at less than 1 second intervals, during normal use.
After the depth function button has been pressed on the DIGICAT 200GIS the display will
indicate the Depth.
After a few seconds the display will show
LOG on the depth display as a prompt to send this
additional data over the wireless network.
When the depth button is pressed and released again the DIGICAT 200GIS will output an
audio confirmation beep (and the data transmitted) to indicate that the data has been
transmitted.

If there is no wireless communication then the LOG function will not be displayed.