50
Version 2.0, Revision I
Operation
5
Display
Status messages
15
Cleaning the print head.
Screen prompt requesting the operator to manually clean the
print head (cleaning swab + alcohol).
The printer is off-line. No new print jobs are accepted.
87
After the last cartridge change, CLEAN
has been pressed to indicate to the printer that a
transport
cartridge
has been inserted. The printer has received a print job
but is unable to print because the cartridge contains cleaning
fluid instead of ink.
Remedy:
Cancel the print job. Switch the printer off and back on and
change the cartridge. Then press
LOADED
or
ERROR
and wait
for 2 minutes.
Caution
Never press
LOADED
after reinserting an ink cartridge which
has already been used. This could cause permanent damage to
the printer.
81-83
Warning: Problem with slide ejection from a magazine!
The display consists of two parts: The
8
is a warning that a
magazine ejector is mechanically blocked. The second digit
of the message (
1-3
) specifies the number of the affected
magazine.
Error messages
All displayed numbers
from
20
to
78
and
89
to
93
.
5.3
Alarm functions
The Leica IP S is equipped with two different alarm functions:
Instrument alarm
The printer has a beeper that emits acoustic signals indicating important instrument states and
functions.
•
Upon pressing a button:
1 short beeping sound
•
Magazine empty/tray stack full:
2 short beeping sounds
•
In case of error:
5 short beeping sounds
•
When ending the head cleaning:
5 short beeping sounds
