Leica IP S, Instructions For Use Manual

Page: 40 / 78

40 Version 2.0, Revision I
Instrument Setup
4
1
Fig. 36
Removing the red protective cap
1. Unscrew the red protective cap ( → "Fig. 35- 3 ") all the way.
2. Remove the information flag and place the red protective cap in the recess provided on the ink
cartridge ( → "Fig. 37- 1 ") .
3. Upon completion, make sure that the red retaining bracket is in the correct position
(
→
"Fig. 37- 2 ") and close the cover plate (
→
"Fig. 37- 3 ") of the printer.
1
2
3
Fig. 37
Warning
Never press the CLEAN button while a new or used ink cartridge is in the instrument!
Very important! Prior to each transport, the cap (
→
"Fig. 35- 3 ") must be screwed onto the nozzle to
prevent the ink from spilling.
4. The sensor in the cartridge slot recognizes the presence of a new cartridge.
5. The
INK EMPTY
indicator
LED
goes out and
88
appears on the display.