12
Version 2.0, Revision I
Safety
2
2.2
Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis for accident
prevention.
Operating the instrument safely is, above all, the responsibility of the owner, as well as the
designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following instructions
and warnings.
Warnings – Transport and Installation
Warning
•
Once unpacked, the instrument may be transported only in an upright position.
•
Do not expose the instrument to direct light (window, bulbs with strong light)!
•
Only connect the instrument to a grounded power socket. Do not interfere with the grounding
function by using an extension cord without a ground wire.
•
Do not operate the instrument in rooms with explosion hazard.
•
Condensation water may form in the instrument, if there is an extreme difference in temperature
between the warehouse and the installation site and if air humidity is high. If this is the case, wait
at least two hours before switching on the instrument. Failure to adhere to this waiting period may
result in damage to the instrument.
Warnings – Markings on the instrument itself
Warning
Markings on the instrument showing the warning triangle indicate that the correct operating
instructions (as defined in this Instructions for Use) must be followed when operating or replacing the
item marked.
Failure to adhere to these instructions may result in an accident, personal injury, damage to the
instrument or accessory equipment.
Some instrument surfaces, which become hot during operation are marked with this warning label:
Touching these surfaces may cause burns.
