Leica GS18 User Manual Download Page 44

Page: 44 / 56

LED

LED Status

Status of the Instrument

RTK Rover

LED

off

GS18 is in RTK base mode or GS18 is

switched off.

green

GS18 is in rover mode, no RTK data is

received via selected port.

flashing

green

GS18 is in rover mode, RTK data is received

via selected port. Rate according to received

correction data.

Connectivity

LED

off

GS18 is not powered or module is not ready.

green

Bluetooth is in data mode and ready for con-

necting.

blue

Bluetooth has connected.

Storage LED

off

No SD card is inserted or GS18 is switched

off.

green

SD card is inserted but no raw data is being

logged.

flashing

green

Raw data is being logged. More than 50 MB

of memory space is available on the SD card.

red

Less than 50 MB of memory space is availa-

ble on the SD card.

flashing red

Raw data is being logged but less than

50 MB of memory space left on the SD card.

fast flashing

red

SD card is full or no SD card is inserted while

raw data logging is configured. No raw data

can be logged.

Battery LED

off

Battery is not connected, flat or GS18 is

switched off.

green

Power is 21% - 100%.

flashing

green

Battery is inserted. External power is connec-

ted.

red

Power is 20% - 11%. The remaining time for

which enough power is available depends on

the type of survey, the temperature and the

age of the battery.

flashing red

Battery is inserted with less than 20% power

remaining. External power is connected.

fast flashing

red

Power is low (<10%).

Power LED

off

External battery is not connected or flat or no

external power supply is connected or GS18

is switched off.

green

External power is 21% - 100%.

red

External power is 20% - 11%.

flashing red

External power is low (<10%).

Operation

Summary of Contents for GS18

























































Search results

Summary of Contents for GS18

Reviews:

Related manuals for GS18

Brands by name

Popular brands

Leica GS18, User Manual

Search results

Summary of Contents for GS18

Reviews:

Related manuals for GS18

Brands by name

Popular brands