Leica GRX1200 series, Getting Started

Page: 37 / 76

Configuration GPS1200 37
Web Interface over
serial connection Applicable for the GRX1200 Classic / GRX1200 Lite. A connection to the Web Interface is
made using a serial cable and
P oint-to- P oint P rotocol.
The procedure of connecting to the web consists of four parts:
• Configure PPP on port RX of the receiver.
• Define a serial line modem device on the PC.
• Define a PPP network connection.
• Establish a PPP connection.
Each part is described below step-by-step. The description is made for Windows 2000.
Windows XP configuration is basically the same, however some screens and description of
settings may vary slightly.
Configure PPP on port RX of the receiver
Define a serial line modem device on the PC step-by-step
Step Description
1. Set PPPonRxPort:Yes using the Startup Configurator. Refer to "3.1.3 Startup
Configurator".
Step Description
1. Click on the desktop of the PC.