Leica GRX1200 series Getting Started Download Page 15

Page: 15 / 76

Configuration

GPS1200

3.1.3

Startup Configurator

Description

The Startup Configurator is an ASCII file-based

• configuration
• extraction

of the basic port and address settings of a GRX1200 Series receiver.

Type

Configuration

Extraction

Use

To set settings.

To query current settings.

File name

StartupConfig.ini

GetConfig.ini

Directory on
Compact-
Flash card

\SYSTEM

Procedure

• GRX1200 Series receiver is

turned on.

• GRX1200 Series receiver is

turned on.

• While powering up, it looks for the

file on the CompactFlashcard.

• While powering up, it writes its

current settings to the file.

• It reads the contents.
• It uses the settings once the

startup is finished.

Example file

On GPS1200 CD

Summary of Contents for GRX1200 series













































































Search results

Summary of Contents for GRX1200 series

Reviews:

Related manuals for GRX1200 series

Brands by name

Popular brands

Leica GRX1200 series, Getting Started

Search results

Summary of Contents for GRX1200 series

Reviews:

Related manuals for GRX1200 series

Brands by name

Popular brands