Leica Flexacam C3, User Manual

Page: 9 / 45

Flexacam C3 User Manual General Notes 9
Safety Instructions (Continued)
Camera safety and EMC
Our camera has been designed, produced and
tested in compliance with
O
EN 61010-1: Safety requirements for elec-
trical equipment for measurement, control,
and laboratory use - Part 1: General require-
ments (for microscope)
O
EN 62368-1: Audio/video, information and
communication technology equipment -
Part 1: Safety requirements (for optional
external power supply only)
O
Radio interference suppression in compli-
ance with EN 55011 Class A
O
EN 61326-1, Electrical equipment for
measurement, control and laboratory use –
EMC requirements
The camera meets the requirements of EU
directives
O
2014/35/EU Low voltage directive
O
2014/30/EU EMC directive
O
2011/65/EU RoHS directive
O
2009/125/EC + VO EU 2019/1782
Ecodesign requirements for energy-related
products
and carries the CE mark.
The camera must be disposed of in
accordance with 2012/19/EU WEEE
directive.
Intended for indoor use only in all EU member
states, EFTA states and Switzerland.
EMC precautions
Prior to the installation of Flexacam C3, the
electromagnetic environment needs to be
evaluated. It is the responsibility of the opera-
tor to ensure compliance with the environment.
If the instrument is being installed in any other
environment than an INDUSTRIAL, it cannot be
guaranteed that the equipment does not inter-
fere with other electronic devices.
INDUSTRIAL environments are part of a sepa-
rate power network, in most cases supplied by
a high- or medium-voltage transformer, dedi-
cated for the supply of installations feeding
manufacturing or similar plants.
If Flexacam C3 is being installed in any
other environment than an INDUSTRIAL,
it cannot be guaranteed that the radiated elec-
tromagnetic emissions are not interfering with
other electronic devices.