Leica Flexacam C3, User Manual

Page: 8 / 45

Flexacam C3 User Manual General Notes 8
Safety Instructions (Continued)
Repairs, service work
O
Refer to "Safety Concept" booklet
O
Only original Leica Microsystems spare
parts may be used.
O
Before opening the camera, switch off the
power and unplug the power cable.
O
Avoid contact with powered electrical
circuits, which can lead to injury.
Transport
O
Before shipping the camera, please reset
the camera to the factory default, so that no
personal data like access details to E-Mail or
network remain stored on the camera.
O
Use the original packaging for shipping or
transporting the individual modules of the
Flexacam C3 and the accessory compo-
nents.
O
In order to prevent damage from vibrations,
disassemble all moving parts that (accord-
ing to the user manual) can be assembled
and disassembled by the customer and
pack them separately.
Integration in third-party products
O
Refer to "Safety Concept" booklet
Disposal
O
Refer to "Safety Concept" booklet
Legal regulations
O
Refer to "Safety Concept" booklet
EC Declaration of Conformity
O
Refer to "Safety Concept" booklet
Health risks
Workplaces with microscopes and cameras
facilitate and improve the viewing task, but
they also impose high demands on the eyes
and muscles of the user. Depending on the
duration of uninterrupted work, asthenopia
and musculoskeletal problems may occur. For
this reason, appropriate measures for reduction
of the workload must be taken:
O
Optimal arrangement of workplace, work
assignments and work flow (changing tasks
frequently).
O
Thorough training of the personnel, giving
consideration to ergonomic and organiza-
tional aspects.
The ergonomic optical design and construc-
tion of microscopes and cameras from Leica are
intended to reduce the exertion of the user to
a minimum.