Leica Flexacam C3, User Manual

Page: 26 / 45

Flexacam C3 User Manual Startup Procedure 26
Switching on the Flexacam C3 (Continued)
PC mode
ON/OFF SS HDMI
SPEED
1
1. Set the ON / OFF switch to "ON" to switch
on the Flexacam C3.
The status light's LED switches from
blinking green to continuously green,
a signal tone sounds and the live image is
displayed on the computer.
The Flexacam C3 is ready to use.
2. Start Leica Application Software X (LAS X).
3. Follow the instructions in the software for
adjusting and acquiring an image.
For additional information on
Leica Application Software X, please
refer to "LAS X Help".
You may be asked to specify the
current camera configuration when
starting LAS X for the first time.
Instead, run the LAS X Hard-
ware Configurator to select the
Flexacam C3