Leica DM750, Manual

Page: 14 / 54

Leica DM750 Manual 14
Care instructions
General instructions
Ϙ
Protect the Leica DM750 microscope
against damp, vapors, acids, alkalis, and
corrosive substances. Do not store chemi-
cals in the vicinity.
Ϙ
Protect the Leica DM750 microscope from
oil and grease. Never grease or oil mechani-
cal parts or sliding surfaces.
Ϙ
Follow the instructions of the disinfectant
manufacturer.
Ϙ
It is advisable to enter a service agreement
with Leica Service.
Cleaning coated parts and plastic parts
Ϙ
Dust and dirt particles should be removed
with a soft brush or lint-free cotton cloth.
Ϙ
Remove coarse debris with a moistened
disposable cloth.
Ϙ
Clinging dirt can be removed using petro-
leum ether or alcohol
Ϙ
Acetone, xylene or nitro-containing thin-
ners must NOT be used.
Ϙ
Never use chemicals to clean colored
surfaces or accessories with rubberized
parts. This could damage the surfaces, and
specimens could be contaminated by abra-
ded particles.
Cleaning glass surfaces
Ϙ
Remove dust using a dry and grease-free
brush made from hair, by blowing with
bellows, or by using a vacuum.
Ϙ
Remove dirt using a clean cloth that has
been moistened with distilled water.
Ϙ
Remove tough dirt using alcohol or petro-
leum ether.