24
6. Assembling
Ergomodule
For raising the eye level of the tube opening, the
30 mm or 60 mm ergomodule may be used.
It is fastened in place with the side clamping
screw.
Magnification Changer
Optionally, a magnification changer (Fig. 25) can
be used, which is operated manually. On the
knurled ring, the following magnification factors
can be set:
1x; 1.5x; 2x
Fig. 13
Magnification changer
6.12
Connection to the Power Supply
• After completing the assembly work, connect
the microscope to the power supply using the
power cable supplied (27.1).
• When using the lamp housing or the external
power supply unit, connect them to the power
supply, too.
WARNING
!
Only use original power cord, or alternate
VDE- / HAR-certified power cords which
meet the minimum requirements of 3x0,75mm
2
and 10A/250V.
Fig. 14
Rear side of the Leica DM3 XL
1 Power supply connection
1
