20
6. Assembling
6.4 Illumination
Caution!
Be sure that the lamp housing is disconnect-
ed from the power supply. Unplug the power
plug and the power supply during assembly.
CAUTION
Light sources pose a potential irradiation risk
(glare, UV radiation, IR radiation). Therefore,
lamps have to be operated in closed hous-
ings and only after being mounted.
6.4.1 LED Lamp Housing LH113
Note:
The Leica DM3 XL microscope is designed for the
LED lamp housing LH113 (order no. 11 504 199)
(Fig. 5) .Connection of lamp housings, other than
LED type, are not supported by microscope out-
lets.
Note:
A separate lamp power supply is necessary to
connect other lamp housings.
• Place the lamp housing in the incident light
lamp housing receptacle (Fig. 6.1) and fasten it
with the clamping screw on the side.
• Connect the lamp housing to the power supply
for incident light (Fig. 6.2) ).
CAUTION
Switch on light sources only if they are firmly
connected to the microscope.
Uncontrolled light output poses a blinding
hazard!
Fig. 5
LED lamp housing LH113
Fig. 6
Rear view of the microscope
1 Incident light lamp housing receptacle
2 Lamp connection for incident light
1
2
