111
Fig. 90
Lamp holders for gas discharge lamps
1
Upper clamp,
2
Seal point of the burner,
3
Lower clamp,
4, 6
Drill holes for fixing the lamp holder,
5
Sockets for cut-out plug,
7
Protective cover
Hg 50
1
2
3
4
5
6
Xe 75
1
3
7
1
3
Hg 100
1
3
Hg 100
Stab.
●
Put the lamp holder with burner inserted into
the lamphousing and secure with the screws
(90.10).
●
Close the lid of the lamphousing. When
closing the lamphousing, make sure that the
pins of the cut-out plug engage in the sockets.
●
Retighten the screws of the lid.
●
Push the cut-out plug in as far as it will go.
●
Align the lamphousing against the microscope
and secure with the clamp screw.
●
Connect the lamphousing to the power unit
(compare mains voltage!).
