13
Safety Instructions
Leica DISTO™ special
5
1.0.0 en
de
en
fr
it
es
pt
nl
da
sv
no
fi
jp
zh
ko
pl
hr
hu
ru
cz
el
Limits of use
)
See section “Technical Data“
Environment:
Suitable for use in an atmosphere appropriate for
permanent human habitation. Cannot be used in an
aggressive or explosive environment. Use in rain is
permissible for limited periods.
Areas of responsibility
Responsibilities of the manufacturer of the original
equipment Leica Geosystems AG, CH-9435 Heerbrugg
(kurz Leica Geosystems):
Leica Geosystems is responsible for supplying the
product, including the User Manual and original
accessories, in a completely safe condition.
Responsibilities of the manufacturer of non-Leica
accessories:
)
The manufacturers of non-Leica accessories for
the DISTO™ are responsible for developing, implementing
and communicating safety concepts for their products.
They are also responsible for the effectiviness of these
safety concepts in combination with the Leica Geosystems
equipment.
Responsibilities of the person in charge of the
instrument:
WARNING:
The person responsible for the instrument must
ensure that the equipment is used in accordance with the
instructions. This person is also accountable for the
deployment of personnel and for their training and for the
safety of the equipment when in use.
The person in charge of the instrument has the following
duties:
•
To understand the safety instructions on the product
and the instructions in the User Manual.
•
To be familiar with local safety regulations relating to
accident prevention.
•
To inform Leica Geosystems immediately if the
equipment becomes unsafe.
Hazards in use
Important hazards in use
WARNING:
The absence of instruction, or the inadequate
imparting of instruction, can lead to incorrect or prohibited
use, and can give rise to accidents with far-reaching
human, material and environmental consequences.
Precautions:
All users must follow the safety instructions given by the
manufacturer and the directions of the person responsible
for the instrument.
CAUTION:
Watch out for erroneous distance measurements if
the instrument is defective or if it has been dropped or has
been misused or modified.
Precautions:
Carry out periodic test measurements. Particularly after
the instrument has been subject to abnormal use, and
before, during and after important measurements.
Make sure the DISTO™ optics is kept clean and that there
is no mechanical damage to the bumpers.
