Leica D-Lux 3 Instructions Manual Download | Manualshive

Page: 123 / 141

background image

Others

123

n

LCD

Conditions

Causes

Images are grainy or
noisy.

Is the ISO sensitivity high or the shutter speed slow?
(When set to [AUTO], ISO sensitivity increases for indoor and

other shooting occasions. When set to [

], ISO sensitivity may

increase depending on movements and brightness of the subject.)
• Reduce ISO sensitivity. (P84)
• Set [NOISE REDUCTION] in [PICT.ADJ.] to [HIGH] or set

every item except [NOISE REDUCTION] to [LOW]. (P91)

• Improve the ambient light.

In [HIGH SENS.] (P68) in scene mode, the resolution of the recorded
picture decreases slightly because of high sensitivity processing.
This is not a malfunction.

Shooting of motion
pictures stops
unexpectedly.

This camera is not compatible with motion picture recording
on MultiMediaCards.

• When you set the [PICT.MODE] to [30fpsVGA], [30fps16:9L] or

[15fps16:9H], we recommend using cards that offer 10 MB/second or
higher speeds (shown on their packages and elsewhere) for best results.

• Depending on the type of SD Memory Card, recording may

stop in the middle.

The picture freezes
momentarily when the shutter
button is pressed halfway.

• Is the AF mode

set to

3-area-focusing (high speed) or

1-area-f

ocusing (high speed)? (P88)

ISO

Conditions

Causes

The LCD monitor
sometimes turns off
although the camera is
turned on.

Have you set economy mode? (P23)

–In economy mode, the LCD monitor turns off while the

flash is charged.

After recording, the LCD monitor is turned off until the camera
is ready for the next picture to be taken. The LCD monitor is
turned off for a maximum of 6 seconds particularly when
using the built-in memory.

The brightness of the LCD
monitor becomes dark or
bright for a moment.

This phenomenon appears when pressing the shutter button
halfway to set the aperture value and does not affect the
recorded pictures.

The LCD monitor flickers
indoors.

The LCD monitor may flicker for a few seconds after turning
the camera on indoors under fluorescent light.
This is not a malfunction.

The LCD monitor is too
bright or dark.

Adjust the brightness of the LCD monitor. (P22)

Is the Power LCD function or high angle mode activated? (P41)

Black, red, blue and
green dots appear on the
LCD monitor.

This is not a malfunction.
These pixels do not affect the recorded pictures.

«
...
121
122
123
124
125
...
»

Summary of Contents for D-Lux 3














































































































































Reviews:

No comments

Related manuals for D-Lux 3

Brand: Canon Pages: 22

PowerShot S400 Digital Elph

Brand: Canon Pages: 2

PowerShot S230 DIGITAL ELPH

Brand: Canon Pages: 2

PowerShot S110 Digital ELPH

Brand: Canon Pages: 7

Brand: Canon Pages: 9

PowerShot SD10 Digital ELPH

Brand: Canon Pages: 2

PowerShot S400 Digital Elph

Brand: Canon Pages: 138

Brand: Canon Pages: 186

Brand: Canon Pages: 106

PowerShot SD100

Brand: Canon Pages: 21

PowerShot S3 IS Digital Camera

Brand: Canon Pages: 27

Brand: Canon Pages: 15

PowerShot S3 IS Digital Camera

Brand: Canon Pages: 2

Brand: Canon Pages: 15

Brand: GE Pages: 76

Brand: EasyN Pages: 11

Brand: Minolta Pages: 41

Brand: Panasonic Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands