Leica CS10 User Manual Download

Page: 92 / 156

CS10/CS15 & GS Sensors, Safety Directions



WARNING

If you open the product, either of the following actions may cause you to receive an
electric shock.
•

Touching live components

•

Using the product after incorrect attempts were made to carry out repairs

Precautions:

Do not open the product. Only Leica Geosystems authorised service workshops are
entitled to repair these products.



The following advice is only valid for power adapter or docking station.



WARNING

The product is not designed for use under wet and severe conditions. If unit becomes
wet it may cause you to receive an electric shock.

Precautions:

Use the product only in dry environments, for example in buildings or vehicles.
Protect the product against humidity. If the product becomes humid, it must not be
used!

Summary of Contents for CS10





























































































































































Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands

Leica CS10, User Manual

Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands