Leica CS10 User Manual Download Page 3

Page: 3 / 156

CS10/CS15 & GS Sensors, Introduction

Symbols

The symbols used in this manual have the following meanings:

Type

Description



DANGER

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.



WARNING

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, could result in death or serious
injury.



CAUTION

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in minor or moderate
injury.

NOTICE

Indicates a potentially hazardous situation or an unintended
use which, if not avoided, may result in appreciable material,
financial and environmental damage.



Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.

Summary of Contents for CS10





























































































































































Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands

Leica CS10, User Manual

Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands