Leica CS10 User Manual Download Page 16

Page: 16 / 156

CS10/CS15 & GS Sensors, Description of the System

Software upload



Uploading firmware can take some time. Ensure that the battery is at least
75% full before beginning the upload, and do not remove the battery during
the upload process.

Software for

Description

All CS models

The software is stored in the flash RAM of the CS field
controller.

CS firmware update instructions

•

Download the most recent CS firmware file from
https://myworld.leica-geosystems.com. Refer to "Intro-
duction".

•

Connect the CS field controller to your PC. Refer to
"3.1.8 Connecting to a Personal Computer".

•

Copy CS firmware file onto a folder on the Leica SD card,
Leica CompactFlash card or USB stick.

•

Tap the Loader icon from the desktop, to run the Loader
application.

•

Browse to the directory into which you copied CS firm-
ware file, select it and start the upload.

•

A message will appear when the upload is complete.



Ensure that a Leica SD card or a Leica CF card is
inserted into the CS field controller before starting
the upload.

Summary of Contents for CS10





























































































































































Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands

Leica CS10, User Manual

Search results

Summary of Contents for CS10

Reviews:

Related manuals for CS10

Brands by name

Popular brands