Leica CM1860, Instructions For Use Manual

Page: 59 / 108

59
Leica CM1860/CM1860 UV
Daily Use of the Instrument
7
Blade holder CE
1. To release the segment arc ( → Fig. 51- 2 ) from the base, use a No. 4 Allen key to loosen
the screw over the clearance angle adjustment (
→
Fig. 51- 23 ) and remove the segment arc
(
→
Fig. 51- 2 ) from the blade/knife holder base.
2. Fold the anti-roll guide system (
→
Fig. 51- 4 ) to the left while holding the lever (
→
Fig. 51- 11 ) .
3. Loosen the pressure plate clamping lever (
→
Fig. 51- 10 ) by turning it counterclockwise and pull
it out.
4. Afterwards, the pressure plate ( → Fig. 51- 1 ) can be removed for cleaning (with alcohol).
5. Loosen the blade holder clamping lever ( → Fig. 51- 12 ) by turning it counterclockwise and pull it
out. The blade holder can now be moved sideways and can be taken out of the segment arc.
Fig. 51
1
11
23
12
2
4
10
Knife holder CN
• Occasionally oil the moving parts such as the axes ( → Fig. 52- 1 ) and ( → Fig. 52- 2 ) as well as the slot
(
→
Fig. 52- 3 ) with a drop of cryo oil.
1
2
3
Fig. 52