18
Instructions for Use V1.2 – 09/2012
4.
Setting up the instrument
• Lift and remove the wooden edge (
6
).
• Remove the ramp (
5
) on the front side of the
pallet (see Fig. 6) and correctly attach it to
the back (see Fig. 8).
6
Fig. 7
Fig. 8
5
5
• Carefully roll the instrument backwards over the ramp from the pallet.
• Push the instrument to the installation location on the castors (
7
).
7
8
Transport
grip points
Do not push the device by its hood (8)!
Use the transport grip points ( , Fig. 8).
The rollers (7) must run over the ramp (5) at the front and rear. Danger of tipping!
The instrument must be transported in an upright position.
Summary of Contents for CM1520
Page 2: ......