manualshive.com logo in svg

Leica BLK2GO, User Manual

Share
Download
Leica BLK2GO User Manual Download Page 30

5.3.3

Field of View (FoV)

19574_001

0°

0°

360°

90°

a

b

 

a

Vertical field of view: 270°

b

Horizontal field of view: 360°

5.4

Data Transfer

Raw data can be transferred from the BLK2GO to a computing device using a

wireless connection.

19576_002

 

5.5

Cooling System

The BLK2GO has an air cooling system. It sucks in and circulates air to main-

tain the temperature of the system components.
The air inlet and the filter cartridge protect from dust particles entering the

housing and components.
The filter cartridge is removable. It can be reached by opening the filter cover.

It is necessary to clean the air inlet and the filter cartridge periodically. Replace

the filter cartridge by a new filter periodically, in addition to the cleaning pro-

cedure.
To remove and clean the filter, refer to "Filter Cleaning Procedure" and follow

the instructions.

☞

The cleaning period depends on the environment where the BLK2GO

is mostly used. The more dusty the environment is, the more fre-

quently the BLK2GO has to be cleaned.

Scanning laser - 

field of view

Description

Description

30

Operation

Summary of Contents for BLK2GO













































Reviews:

No comments

Brands by name

Popular brands

Load more brands