5
Operation
5.1
Operation - Getting Started
REC
REC
19565_002
66
55
44
33
22
11
22
1.
Press the power button to turn on the BLK2GO. The ring-shaped
LED is blinking yellow to indicate that the instrument is booting up.
2.
When the ring-shaped LED is continuous green, the BLK2GO is ready
to start operation in stand-alone mode or with a connected device.
Follow the instructions on the app to establish the connection.
3.
Place the BLK2GO on the table stand and press the power button to
start the scan. The ring-shaped LED is blinking yellow and the
instrument is initialising.
4.
When the ring-shaped LED starts pulsating green, the BLK2GO is ini-
tialised and is recording data. Take the BLK2GO and start walking.
5.
While the BLK2GO is recording data, press the power button by a
quick click to take a picture with the detail camera. One green blink
of the ring-shaped LED indicates that the picture is successfully
taken.
6.
Press the power button to stop recording data. While data are being
saved, the ring-shaped LED is blinking yellow. Once data have been
saved, the ring-shaped LED is continuous green.
Operation,
step
‑
by
‑
step
Operation
27
