Operation
40
ARveo / Ref. 10 747 384 / Version 04
• Clicking the
or
button changes the working
distance in increments of 1. Holding down the button
with your finger changes the value in increments of 5.
• You can adjust the working distance motor speed in the
"Speed" menu.
• These values can be saved individually for each user
(see page 46).
• You can return the working distance motor to the
working distance saved for the current user using the
"WD Reset" button.
You can read the currently set working distance on the
"Main" screen of the control unit or read it on the display (1)
on the Leica M530 Optics carrier.
1
WARNING
Danger to the patient due to failure of the working distance
motor.
X
If the working distance motor fails, adjust the working
distance manually.
Setting the working distance manually
WARNING
Danger of serious damage to tissue due to incorrect working
distance.
X
When using lasers, always set the working distance of
the microscope to laser distance and lock the microscope
in position.
X
Do not adjust the rotary button for manual setting of
the working distance while using the laser.
NOTE
Destruction of the working distance motor.
X
Only adjust the working distance manually if the working
distance motor is defective.
If the working distance motor fails, working distance can be
manually adjusted using the rotary knob (4).
4
3 2
X
Turn rotary button (4) and set the working distance as required.
Locking/releasing the working distance
It is necessary to lock the working distance when working at
a fixed distanc
e or when using a laser.
X
Press key (2).
The yellow LED (3) turns on and the working distance is locked.
X
Press key (2) again.
The yellow LED (3) turns off and the working distance is
released.
