Rugby 610, Operation
18
3.3
Turning on and off the Rugby
Turning on and off
Press the Power button to turn on or off the Rugby.
After turning on:
• If set up within the 5° self-levelling range, the Rugby automatically levels to create
an accurate horizontal plane of laser light.
• Once levelled, the head starts rotating and Rugby is ready for use.
• After 30 seconds of completing the levelling, the H.I. Alert system becomes active
to protect the laser against changes in elevation caused by movement or settling
of the tripod.
• The self-levelling system and H.I. Alert function continues to monitor the position
of the laser beam to ensure consistent and accurate work.
3.4
Automatic Mode
Description of the
Automatic Mode
The Rugby always starts up in Automatic Mode.
In Automatic Mode the Rugby automatically levels if set up within the 5° self-levelling
range.
3.5
Manual Mode
Description of the
Manual Mode
Manual slopes can be created using the Rugby 610 together with the A240 Manual
Slope Adapter (790434).
In Manual Mode the self-levelling will be deactivated.
After turning the Rugby off and on again, the Rugby is in Automatic Mode.
Changing to Manual
Mode
Press and hold the Power Button for 5 seconds to change to Manual Mode.
• The Rugby will beep 5 times while holding the Power Button.
• After releasing the button, the Rugby levels. The levelling LED flashes green, then
turns solid green for a few seconds.
• After levelling, the levelling LED turns red and the Rugby is in Manual Mode.
Level Indicator LED
green
the axis is level.
flashing green
the axis is levelling.
red
the axis is in Manual Mode.
H.I. Indicator LED
flashing red
rapidly
movement of the laser has triggered an H.I.
Alert.
IF the
is/are
THEN
