Leica Geosystems GS14, User Manual, Page: 39 / 54

4.3 Working with the Memory Device
•
Keep the card dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
4a
4a 4a 4a
11
33
55
008700_001
☞
Removing the microSD card while the GS14/GS16 is turned on can
cause loss of data. Only remove the microSD card or unplug connect-
ing cables when the GS14/GS16 is switched off.
☞
The microSD card is inserted into a slot inside the battery compart-
ment of the instrument.
1. Push the slide fastener of the battery compartment in the direction
of the arrow with the open-lock symbol.
2. Remove the cover from the battery compartment.
3. Press the latch of the SIM/microSD card cover and remove the cover.
4. Slide the microSD card with the logo facing upwards firmly into the
slot until it clicks into position.
5. Insert the SIM/microSD card cover to cover slot.
6. Insert the cover over the battery compartment.
7. Push the slide fastener in the direction of the arrow with the close-
lock symbol.
4.4 Working with the RTK Device
Depending on the GS14/GS16 model one or two of the following devices are
integrated:
Type Device
2G GSM Cinterion BGS2-W
3.75G GSM/UMTS Cinterion PHS8-P/PHS8-J
3.75G GSM/UMTS Cinterion PXS8
RX UHF radio Satel OEM20, receive
RX/TX UHF radio Satel OEM22, receive/transmit
RX/TX UHF radio Satel M3-TR4, receive/transmit
☞
☞
Insert a microSD card
into GS14/GS16 step-
by-step
Devices fitted into
the GS14/GS16 GNSS
instrument
Operation 39