Leica Geosystems GS14, User Manual, Page: 29 / 54

12. To hang the field controller on
the tripod leg, use the hook on
the hand strap or use the utility
hook. Refer to the User Manual
of the field controller.
Insert the height hook into the
carrier.
13. Insert the height hook into the
carrier.
Measure the antenna height
using the height hook.
14. Measure the antenna height
using the height hook.
Press the ON/OFF button on the
instrument for at least 2 s to
switch on the instrument.
15. Press the ON/OFF button on the
instrument for at least 2 s to
switch on the instrument.
-
4.1.3 Setting up as a Real-Time Rover
The equipment setup is used for real-time rover with extended periods of use
in the field.
Connections are made to the GNSS antenna, radio antenna and field controller.
The field controller is fixed to the pole with the GHT62. Connection between
the GS14/GS16 instrument and the field controller is made through Bluetooth.
• The antenna is mounted directly using screw fitting. If using stub and
adapter, procedures can vary slightly.
• When using the pole with stub, ensure that the antenna and the screw-to-
stub adapter slide down the full length of the stub before tightening the
locking ring. An incorrectly mounted antenna will have a direct effect on
the results.
• Aluminium poles are used. They can be replaced with their carbon fibre
equivalent without any change to these instructions.
• Standard radio is used throughout the instructions. Digital cellular phones
can also be used but the setup can differ slightly.
Use
Description
☞
Operation 29