Name
Description
GEV223
USB data cable, 1.8 m, connects instrument to Mini-USB to
USB
GEV234
USB data cable, 1.65 m, connects CS to GS or CS to PC (USB)
GEV261
Y-cable, 1.8 m, connects instrument to PC – battery
☞
Skip the following steps if you have never installed Leica USB drivers
before.
If older drivers were previously installed on the PC, follow the instructions to
uninstall the drivers prior the installation of the new drivers.
1.
Connect your instrument to the PC via cable.
2.
On your PC, select to
Control Panel
>
Device Manager
.
3.
In
Network Adapters
, right-click on
Remote NDIS based LGS…
.
4.
Click on
Uninstall
.
5.
Set
Delete the driver…
as checked. Press
OK
.
1.
Start the PC.
2.
Run the
Setup_Leica_USB_XXbit.exe
to install the drivers necessary
for Leica devices. Depending on the version (32bit or 64bit) of the
operating system on your PC, you have to select between the three
setup files following:
•
Setup_Leica_USB_32bit.exe
•
Setup_Leica_USB_64bit.exe
•
Setup_Leica_USB_64bit_itanium.exe
☞
To check the version of your operating system, go to
Con-
trol Panel
>
System
>
System type
.
☞
The setup requires administrative privileges.
☞
The setup has to be run only once for all Leica devices.
Uninstalling the
previous drivers
Install Leica USB
drivers
34
Operation
Summary of Contents for GS14
Page 1: ...Leica GS14 GS16 User Manual Version 5 0 English ...
Page 53: ......