Leica BIOSYSTEMS CM3600 XP Instructions For Use Manual Download Page 3

Page: 3 / 86

Leica CM3600 XP

The information, numerical data, notes and value judgments contained in this Instructions for Use

represent the current state of scientific knowledge and state-of-the-art technology as we understand

it following thorough investigation in this field.

We are under no obligation to update the present Instructions for Use periodically and on an ongoing

basis according to the latest technical developments, nor to provide our customers with additional

copies, updates etc. of this Instructions for Use.

To the extent permitted in accordance with the national legal system as applicable in each individual

case, we shall not be held liable for erroneous statements, drawings, technical illustrations etc. contained

in this Instructions for Use. In particular, no liability whatsoever is accepted for any financial loss or

consequential damage caused by or related to compliance with statements or other information in this

Instructions for Use.

Statements, drawings, illustrations and other information regarding the contents or technical details of

the present Instructions for Use are not to be considered warranted characteristics of our products.

These are determined only by the contract provisions agreed between ourselves and our customers.

Leica reserves the right to change technical specifications as well as manufacturing processes without

prior notice. Only in this way is it possible to continuously improve the technology and manufacturing

techniques used in our products.

This document is protected under copyright laws. All copyrights to this documentation are held by

Leica Biosystems Nussloch GmbH.

Any reproduction of text and illustrations (or of any parts thereof) by means of print, photocopy,

microfiche, web cam or other methods – including any electronic systems and media – requires express

prior permission in writing by Leica Biosystems Nussloch GmbH.

For the instrument serial number and year of manufacture, please refer to the nameplate on the back of

the instrument.

Note

Leica Biosystems Nussloch GmbH

Heidelberger Strasse 17 - 19

69226 Nussloch

Germany

Tel.:

+49 - (0) 6224 - 143 0

Fax:

+49 - (0) 6224 - 143 268

Web:

www.LeicaBiosystems.com

Summary of Contents for CM3600 XP























































































Search results

Summary of Contents for CM3600 XP

Reviews:

Related manuals for CM3600 XP

Brands by name

Popular brands

Leica BIOSYSTEMS CM3600 XP, Instructions For Use Manual

Search results

Summary of Contents for CM3600 XP

Reviews:

Related manuals for CM3600 XP

Brands by name

Popular brands