manualshive.com logo in svg

Leica BIOSYSTEMS 1404723512, Instructions For Use Manual, Page: 10 / 42

Share
Download
Leica BIOSYSTEMS 1404723512 Instructions For Use Manual Download Page 10

10

Version 2.4, Revision L 

Safety

2

2.3 

Safety instructions for handling the instrument

Danger

Caution 

Extremely sharp blades pose risk of injury when touched!

Caution 

Fresh tissue poses risk of infection!

Caution 

When not in use, cover magnifier with corresponding lid to avoid risk of fire.

Warning 

Avoid touching live parts under any circumstances!

Proper handling

•  Be sure to handle knives and blades very cautiously!
•  Never touch the cutting edge of knives and blades!
•  Do not leave knives, blades and bladed knife holders unprotected.
•  All appropriate safety precautions must be met to avoid the risk of infection.
•  Protective clothing according to safety regulations for "Working with harmful substances" (Safety 

mask, gloves, protective clothing) must be worn!

•  Cover the magnifier during work breaks as it may act as a burning glass when not covered!
•  In case of emergency, press the red 

EMERGENCY STOP

 switch (at the right side of the instrument). 

To release the switch, turn it in the direction of the arrow.

•  The instrument may be opened by authorized service personnel only.
•  Before removing the cover, ensure that the instrument is unplugged.

Summary of Contents for 1404723512











































Reviews:

No comments