Operation
38 / 74
1.0
Vento
®
II
Stopping automatic dosing:
The dosing system will be stopped automatically when the hydraulics are raised or the travel speed is less than 1.5
km/h. The spreading procedure restarts when both signals are received again.
START/STOP
1. The spreading procedure can be stopped at any
time by pressing the Start/Stop key.
Possible settings in automatic mode:
The output rate and product can be set at any time. A product change is only possible if several products have al-
Chapter 4.5.4, "Calibration test"
.
1. Select a product or output rate by turning the turn-
and-push button.
2 Test2
0.2
kg
/
ha
0
U
/
min
0
km
/
h
+50%
2.0m
2. Push the turn-and-push button to edit the product
selection or output rate.
3. Turn the turn-and-push button to choose between
the products or values.
4. Push the turn-and-push button to confirm the prod-
uct selection or output rate.
Summary of Contents for Vento II
Page 73: ...Vento II 1 0 73 74 ...
