Mounting and start-up
12 / 74
1.0
Vento
®
II
3.4 Installing hoses
Advice
Route hoses with as few bends as possible, and with the largest possible bending radius.
Incorrect hose routing can result in blockages in the hose.
Only insert clean hose grommets into the holder.
Installing hose
1. Install the sealing ring
(1)
on the hose grommet.
Ensure that it is correctly seated to avoid capacity
losses.
1. Secure the hose grommet
(2)
to the hose.
2. Slide the hose grommet
(2)
into the mounting
(3)
un-
til it engages.
3. Route the hose and cut to length.
4. Cut the hose off with a straight end.
5. Secure the baffle plate to the hose using a hose clip
(see detail illustration).
Summary of Contents for Vento II
Page 73: ...Vento II 1 0 73 74 ...
