Mounting and start-up
Vento
®
II
1.0
13 / 74
3.5 Electrical connection
Caution!
Risk of short-circuit and injury when working on the battery and electrical system!
Electrical current flowing through the body can cause cramps, ventricular fibrillation,
heart stoppage and internal burns. Risk of burns due to arcing caused by short circuits.
•
Protect the battery against damage and moisture.
•
Disconnect the electrical power supply before starting work on the battery and electrical system.
•
Use suitable tools so as to avoid short circuits.
•
Sure that the cables are routed without tension, kinking and chafing, and also avoid bending them
around sharp edges.
•
During all work on the battery, please comply with the regulations of the vehicle manufacturer in
question.
•
Only use original cables, or ones approved by the manufacturer.
•
Always push on the cap and lock it to protect electrical connections against damage.
Advice
Faulty cables or cables with incorrect dimensions can lead to malfunctions and damage to the spread-
er. Any changes to cable or plug connections without factory approval automatically invalidates the entire
warranty.
Changes to cables undertaken by the customer are taken into account in the case of repair. Only use original ca-
bles, or ones approved by the manufacturer. You must consult with the manufacture before carrying out any cable
modifications. Power loss must be taken into account when extending cables. A poor power supply may prevent you
from achieving the desired blower speed. Also, this could lead to intermittent complete failure.
Summary of Contents for Vento II
Page 73: ...Vento II 1 0 73 74 ...
