Operating instructions
Settings and displays
22
4.5 Setting the EHR cycle
In the headland manager (optional accessory) you can set how often the slide
should open and close depending on the lifting and lowering of the hydraulics.
The EHR cycle can be set to a maximum of ten times.
4.6 Adjusting the empty indicator
Depending on the requirement and spreading material, the empty indicator
can be set to respond earlier or later.
The values can each be set from -50 to +50.
Note:
Depending on the spreading material or material humidity, the remainder level
may vary somewhat.
Press the + or - button to set
the respective value.
Factory setting is 0.
+ values: Switch on and off at
high fill level.
- values: Switch on and off at
low fill level.
Setting
0
Empty indicator
ON
Press toggle switch:
Setting saved, press next menu item
or main switch:
Setting saved and machine
switched off.
