Lehner Lifttechnik SIGMA, User Manual

Page: 28 / 33

Sigma | User Manual Version 09/2022 Page 24
10.2.11 Documents / Emergency release key
▪
Are all technical documents available (circuit diagrams, setting instructions, operating
instructions, etc.)?
▪ Is an emergency release key available
10.3 Lubricants and operating fluids, spare parts
10.3.1 Lubricants and operating fluids
▪
Rails - Lubrication of the guide rails is not necessary
▪
Chains
-
Lubrication of the chains and impellers is not required
▪
Joints - Joints and sliding surfaces must be lubricated with engine oil or with suitable greases.
▪
Preservative - The chains can be treated with a preservative to protect them from corrosion
▪
Cleaning agents - Do not use aggressive cleaning agents to clean plastic-coated or painted
surfaces.
10.3.2 Spare parts
Only original spare parts from Lehner Lifttechnik may be used, as this is the only way to guarantee
safety and functionality. If other products are used, the declaration of conformity loses its validity.
11 ESTABLISHMENT
11.1 Installation / Repair
Installation work on the entire system may only be carried out by the manufacturer or its authorised
partner companies. Unauthorised interventions or modifications to the system will invalidate the
operating permit. The exclusion of liability in the event of consequential damage of any kind shall
apply. For more detailed information, please refer to the installation manual. For more detailed
information on installation, please refer to the installation manual.
11.2 Dismantling and disposal
Dismantling work on the entire system may only be carried out by the manufacturer or its authorised
partner companies. The exclusion of liability for consequential damage of any kind is excluded.
According to the European Directive 2002/96/EC on waste electrical and electronic equipment and
its implementation in national law, used electrical equipment must be collected separately and
recycled in an environmentally sound manner.