BD
A M410 L033-A01 /-A02 2018-04-24 (GB)
8
GETTING STARTED AND CHANGING BATTERIES
Make sure that the lock and the RFID reader are correctly connected to each other with the connecting cable.
Make sure that the connections between the plugs and sockets are properly aligned.
CAUTION:
Use only a CR123A primary-battery.
Program the lock in accordance with these operating instructions. Once the programming operation is completed,
ensure that the system is functioning correctly.
TIPS FOR THE FOLLOWING PROGRAMMING STEPS
The last 5 seconds before the shutdown of the programming process are announced by the flashing of a yellow lamp
and acoustic signals. The visual and acoustic signals are differentiated as follows.
Optical signals
Short flashing
Long flashing
Acoustic signals
Short
Long
Inserting the battery
Battery is inserted correctly in the battery
compartment.
Open the battery compartment
as shown above.
Insert the battery first with the
minus pole as shown above. The
battery is placed on the battery
removal tape so that the tape tip
protrudes.
To remove the battery, pull on the
battery removal tape.
Close the battery compartment
with the tape inserted.