Nurse call and personal transmitter technologies
– MediSwitch rehab technology – Emergency call systems – OEM adaptations
www.lehmannweb.com
Lehmann Electronic Niederkassel
© 2019
LE243 V1.06 EN
P. 13 / 27
Tel: +49 2208 9492 0 Fax.: +49 2208 949232
VARIOREC
®
Instruction Manual
Wireless Emergency Call Technology
VarioRec6
Radio Receiver
10.2.2 Programming of Radio Receivers Used for Special Functions
Examples of special functions
Wireless Momentary Stop Switch
Wireless light button
Image sequence: Programming of radio receivers used for special functions.
Trigger
radio call
3
New radio transmitter
has been detected
Green / orange
flashing light
4
The new radio transmit-
ter has been pro-
grammed
6
Orange for 1.5 s
5
Briefly press
middle (!)
button
Receiver is in
programming
mode
2
Green
flashing light
Press and hold the
right-hand button when
plugging
1
May be repeated for additional transmitters
Briefly press
left-hand button
2
Green
flashing light
Receiver is in
programming mode
From submode back
to programming mode
Red flashing
light
This error message may have been
caused by the following:
Several radio receivers trans-
mit simultaneously.
Radio interferences exist.
In both cases, repeat the process.
Otherwise, try to find the interference
or try to repeat the programming
procedure at another location.
Possible error message
8
Press and hold
left-hand button
0
Green
Receiver is in
operating mode
From programming mode
to operating mode
Receiver is in
programming
mode
7
Green
flashing light
