manualshive.com logo in svg

Lehle DUAL EXPRESSION, Operating Instructions Manual

Share
Download
Lehle DUAL EXPRESSION Operating Instructions Manual Download Page 14

LEHLE GmbH · Germany · www.lehle.com · [email protected]

14

In factory setting the pedal range of the 
LEHLE DUAL EXPRESSION is perfectly 
calibrated and the switch output of the 
10K socket is being triggered in the last 
few millimetres.
Normally, it doesn’t need a calibration 
again. Nevertheless, you can adjust the 
pedal to your own requirements.

1.) Entering the calibration process menu

To enter the calibration process menu, 
first disconnect the power supply connec-
tion.
Press and hold the 10K soft touch button 
and reconnect the power supply connec-
tor. You can now release the soft touch 
button.
The blue 10K switch LED and the white 
50K TRS LED are flashing alternately.

2. Calibrating the pedal range

In order to calibrate the pedal range, 
where the minimum (heel) and the maxi-
mum (toe) position of the pedal range 
should be reached, in the calibration pro-
cess menu (1.) the 50K soft touch button 
needs to be pressed.
The 50K TRS LED flashes.

Move the rocker within 5 seconds (say 
“Lehle switcher” five times) to the most 
minimal heel position and then into the 
maximum toe position.
The pedal learns these two positions 
and stores the values inside. After the 5 
seconds the 50K TRS LED stops flashing, 
goes off and the calibration process is 
finished.
The LEHLE DUAL EXPRESSION reboots 
again.

How long the pedal range shall be, is 
your decision. 
This can be all the way to the stop or 
shortly before, if you like a decreased 
pedal range. 
As in the factory setting, we recommend 
the use of the whole pedal range, since 
minimum and maximum values can often 
be set at the effects pedal itself.

CALIBRATION OF THE PEDAL RANGE AND SWITCH OUTPUT

!

On page 25 you will find a user flow  
map, where all these procedures are 
shown.

Summary of Contents for DUAL EXPRESSION





























Reviews:

No comments

Brands by name

Popular brands

Load more brands