LEGRAND Wattstopper RT-200, Installation Instructions Manual

Page: 4 / 8

4
PREFERENCES
The PREFERENCES menu allows the user to customize the unit’s
features including the time/date format, sound and flash.
• Time format – choose between a 12-hour or 24-hour format
• Date format – choose between MM/DD/YY or DD-MM-YY
• Sound – When SOUND is enabled the RT-200 will beep
every 5 seconds when the load is going to be turned OFF
in less than a minute. It will also beep each time the user
presses the ↑, the center , or the ↓ button. A small ear icon will
appear on the MAIN PAGE when sound is enabled.
• Flash – When FLASH is enabled the RT-200 turns OFF the
load for 1 second and then turns it back ON to warn the user
that the load is turning OFF in 1 minute. When flash is enabled,
a lightening bolt icon will appear on the MAIN PAGE.
• Countdown – When COUNTDOWN is enabled, the manual
override to turn a load ON times out. Default countdown of
manual override is 2 hours, but this can be adjusted or disabled.
Available values: None, 5 min, 10 min, 15 min, 30 min, 1 hr, 2 hr,
3hr, 4 hr, 5 hr, or 6 hr.
Setting Steps
TIME FORMAT 1. From the SETUP menu highlight
PREFERENCES and press the center
button. TIME FMT should be highlighted.
2. Press the center button to select time
format.
3. Press the ↑ button to change format.
4. Press the center button to save time
format setting and to move highlighted
cursor back to TIME FMT .
DATE
FORMAT
1. Press the ↓ button to highlight
DATE FMT
.
Press the
center
button to select date
format.
2. Press the ↑ button to change format.
3. Press the center button to save date
format.
SOUND 1. Press the ↓ button to highlight SOUND .
Press the center button to select the
sound setting.
2. Press the ↑ button to enable or disable
sound.
3. Press the center button to save setting.
FLASH 1. Press the ↓ button to highlight FLASH .
Press the center button to select the flash
setting.
2. Press the ↑ button to enable or disable
flash.
3. Press the center button to save setting.
COUNTDOWN
1. Press the ↓ button to highlight
COUNTDOWN
. Press the
center
button to
select the countdown setting.
2. Press the ↑ button or ↓ button to select the
countdown time.
3. Press the center button to save setting.
To exit the PREFERENCES menu, press the ↓ button to highlight
PREVIOUS MENU . Press the center button to select and return to
the SETUP menu.
SCHEDULING
The RT-200 has 8 programs allowing the user flexibility in setting
schedules to turn the connected load ON/OFF.
Setting Steps
PROGRAM From the SETUP menu highlight
SCHEDULING and press the center
button. PROGRAM should be highlighted.
Press the
center
button to select program
#.
Press the
↓ button to decrease the
program and the ↑ button to increase the
program #.
Press the
center button to save the
program #.
Day(s) - Set
the days of the
week the lights
will turn ON for
that particular
program
Press the
↓
button to highlight
DAY(s)
.
Press the
center
button to select the days
when the program will operate.
Press the
↑ to choose the day(s); choices
include:
None (program is not in use).
All (program turns ON the connected load
every day).
Mon – Fri (program turns ON the
connected load Monday through Friday).
Weekends (program turns ON the
connected load Saturday and Sunday.
Each individual day of the week (choose
the day of the week that the connected
load should turn ON).
Press the
center button to save setting.
ON – Program
the time the
connected load
turns ON
Press the ↓ button to highlight ON. Press
the center button to select what time the
load will turn on.
Press the
↑
to set the ON time; choices
include:
TIME (program a specific time to turn ON
the load).
DUSK (program up to 99 minutes before
or after dusk for the load to turn ON.
Note: this is one of the reasons that it
is important that the correct time zone,
longitude/latitude coordinates are entered
so that the time switch can determine
when dawn and dusk will take place).
DAWN (program up to 99 minutes before
or after dawn for the load to turn ON.
Press the center button to save setting.
OFF – Program
the time the
connected load
turns OFF
Press the
↓
button to highlight OFF. Press
the
center
button to select what time the
load will turn OFF.
Press the
↑ to set the OFF time; choices
are the same as for the ON time.
Press the
center button to save setting.
Follow the same steps to set Programs 1-8.
NOTE: For holidays, set a schedule for each individual day of
week, and then change day to “None” for holiday shutoff.
To exit the SCHEDULING menu, press the ↓ button to highlight
PREVIOUS menu. Then press the center button to select and
return to the SETUP menu.