2
PIR
32 ft
(9.75m)
Ultrasonic
25 ft x 25 ft
(7.62m x 7.62m)
COVERAGE PATTERN
The LMDC-100 provides a 360° coverage pattern. The coverage shown represents maximum coverage for walking motion at a
mounting height of 10 feet.
PIR Coverage
Ultrasonic
Coverage
Rear
housing
4" Octagonal J-Box
(at least 1.5" deep)
Front cover
Ceiling
Ceiling hole
LMRJ cable
LMRJ cable
Spring clips (2)
Screws
For applications requiring plenum rating
No box required in non-plenum rated applications
Rear
housing
Front cover
MOUNTING
To octagon box:
Through ceiling tile:
WARNING:
A junction box used for sensor installation must not contain any Class 1, Class 3, or other power or lighting line voltage
circuits.
CONNECTIVITY
The illustrations below show examples of free-topology wiring. The LMDC-100 communicates to all other Digital Lighting Management
devices connected to the low voltage DLM Local Network, regardless of their position on the DLM Local Network.
Line
Voltage
Room
Controller
J-Boxes
Daylight Sensor
Switch
Switch
Corner Mount
Sensor
Ceiling Mount
Sensor
DLM Local Network
Low Voltage
LMRJ Cables
Loads
2
1
Line/Hot
Black wire
Neutral
White wire
Red wire
to Load A (1)
Yellow wire
to Load B (2)
LMRC
102
Room
Controller
J Box
Ceiling Mount
Occupancy
Sensor
Switch
To
Load
