Page
101
301 Fulling Mill Road, Suite G
©Copyright 2010 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
Basics
As indicated on the display, the Up and Down compass keys will move the highlight box. To
call an intercom unit, highlight that unit, then press and hold the Talk/Select button. The Unity
Intercom is a ‘press and hold’ intercom. This means to make an intercom call, the Talk/Select
button must be HELD when talking TO the highlighted unit. When the Talk/Select button is
released, the highlighted unit will have a number of seconds (15 seconds by default, but
adjustable in Settings -> Intercom) to respond in what is called ‘talk hands free’ mode. During
this mode, the unit being CALLED may respond to the CALLER without any specific intercom
interaction. After talk hands free mode times out, the intercom will return to the state it was in
upon entering the intercom screen. An audible tone will sound to indicate the transition
between the states mentioned above. A typical intercom conversation will go as follows:
•
User presses (and holds) Talk/Select
•
A tone sounds to indicate it is OK to start talking
•
User talks TO selected unit
•
User releases Talk/Select
•
A tone sounds to indicate transition to ‘talk hands free’ mode
•
Selected unit has some number of seconds (15 seconds default) to talk BACK to
caller
•
A tone sounds to indicate end of conversation
Monitor
Pressing softkey 3 will place the unit into monitor mode. When a unit is in monitor all other
units on the system will be able to hear it.
Send Message
Pressing softkey 4 from the intercom menu will open the messaging menu.