Page
127
301 Fulling Mill Road, Suite G
©Copyright 2010 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
7.Using Cameras
Pressing Talk/Select when the icon wheel is
over Cameras will bring up the Unity Cameras
screen. This screen contains live feeds of all
cameras connected to the system (Note: The
feeds are displayed one at a time).
The softkeys in the camera screen switch between the camera feeds. If the Unity system is attached to
no more than 4 cameras, softkeys 1-4 will switch to each of these four cameras respectively. If the Unity
system is attached to more than 4 cameras the keys will be mapped as follows:
Softkeys 1-3 are mapped to cameras 1-3 OR cameras 4-6.
Softkey 4 is mapped to ‘More’ (as shown above) which toggles the mapping of softkeys 1-3.
Camera sequencing:
Pressing either the right or the left compass key will begin sequencing through the available cameras.
The dwell between camera switching can be adjusted by pressing the up or down compass keys.
To stop sequencing, the left or right keys may be pressed again, or any camera key may be pressed to
switch to that camera and end sequencing.
