Doc No. FM0410 issue N Page 54
40. SPECIFICATION - LIFT CALLPOINT (FLUSH STAINLESS STEEL)
Tynetec Part No’s
ZXT260 Standard, ZXT265 Custom Engraved
EMC Approval
EN 55022
Safety Approval
EN 60950
Data Connection
RS485 (19200 Baud)
Power Requirement
24V DC @ 2mA (standby)
Audio Channel
Handsfree Voice Switched
8 Way Address DIL Switch
Set Binary ID
Loudspeaker
35 Ohm 0.5 Watts
Lift Speech Unit
Flush Mount
Standard (Horizontal)
–
for Vertical Mount use ZXT265
Backbox
Not Available
Pushbutton
Illuminated Vandal Resistant (Bulgin Type MPI002/28/RD)
Loudspeaker
Protected by Fine Mesh Stainless Steel Grill
Microphone
Protected by Fine Mesh Stainless Steel Grill
DDA Compliance
High Visibility Yellow Halo around Pushbutton
Engraving
ZXT260: CALL (Black infill, 5mm high), ZXT265: Custom Engraved
Audible Reassurance
No
Visual Indication
Red Call LED
Kick Switch Input
Yes - N/O
Lift Company Travelling Cable
4 Core
Lift Speech Unit Mechanical
Fascia Material
12 SWG Stainless Steel
Fascia Dimensions
140mm x 282mm x 2.64mm (HxWxD)
Cut-out Dimensions
94mm x 212mm (HxW)
Fixings
4 No. on 106mm x 216mm Centres
Ingress Protection Rating
IP20
Weight
860 grams
Lift Interface Mechanical
Enclosure Material
Light Grey ABS (RAL 7035)
Flammability Rating
UL 94 V-0
Ingress Protection Rating
IP54
Dimensions
170mm x 85mm x 34mm (LxWxD)
Weight
208 grams
Environmental
Operating Temperature
0
o
C to +40
o
C
Operating Humidity
10% to 90% RH
Relative Humidity
Non-condensing
