LEGRAND Trimod HE User Manual Download Page 22

Page: 22 / 56

MAIN PAGE

DATA DISPLAYED

5 load availability on output

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: Phase L1 - power in kVA or in Watt compared with the

nominal power or current compared with the rated or

relative percentage

3rd line: Phase L2 - power in kVA or in Watt compared with the

nominal power or current compared with the rated or

relative percentage

4th line: Phase L3 - power in kVA or in Watt compared with the

nominal power or current compared with the rated or

relative percentage

6 measurements on output

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: Output L1 phase - Voltage, current and active power

3rd line: Output L2 phase - Voltage, current and active power

4th line: Output L3 phase - Voltage, current and active power

7 output line voltages

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: line voltage between phase L1 and L2 on output

3rd line: line voltage between phase L2 and L3 on output

4th line: line voltage between phase L3 and L1 on output

8 measurement on input

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: Input L1 phase - Voltage, current and active power

3rd line: Input L2 phase - Voltage, current and active power

4th line: Input L3 phase - Voltage, current and active power

9 bypass line voltages

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: Line voltage between L1 and L2 of bypass line

3rd line: Line voltage between L2 and L3 of bypass line

4th line: Line voltage between L3 and L1 of bypass line

10 battery status

1st line: Functioning status of the UPS. If the text is "TRIMOD", the

UPS is functioning properly

2nd line: Voltage, charging current (negative value when charging in

progress, positive value when the batteries are powering the

equipment)

3rd line: Battery capacity percentage compared with the nominal

percentage, time remaining, total autonomy time

4th line: Battery status

- Battery Stand-by

- Discharging

- Reserve autonomy

- End autonomy

- Charging - ph1 - battery recharging status (current limitation)

- Charging - ph2 - battery recharging status (voltage limitation)

- Charging - maint: Battery recharging in maintenance mode

- Charging - float.: Battery charging in floating mode

- Testing batteries: Battery test in progress

- Equaliz. batteries: Battery equalizing in progress

- BATTERY FAULT: battery voltage lower than 100V

- MaxTime on Battery: end of the maximum set time for the

functioning in battery mode

Charging - maint.

5. Control panel

Summary of Contents for Trimod HE

























































Search results

Summary of Contents for Trimod HE

Reviews:

Related manuals for Trimod HE

Brands by name

Popular brands

LEGRAND Trimod HE, User Manual

Search results

Summary of Contents for Trimod HE

Reviews:

Related manuals for Trimod HE

Brands by name

Popular brands