LEGRAND Trimod HE, User Manual

Page: 18 / 56

18
4.1 Visual check
On delivery of the UPS, carefully inspect the packaging and the product for any damage that might have occurred during
transport. Check there is no damage to the indicator on the outer label reading “Shock Watch”.
If there is possible or ascertained damage, immediately inform:
- the transporter;
- the LEGRAND Technical Support Service.
Check that the equipment corresponds with the items indicated in the delivery documentation.
Follow the instructions in Chapter 8 when storing the UPS.
4.1.1 Equipment check
The equipment and the relative supplied accessories must be in perfect conditions.
Check that:
- the shipping data (address of the recipient, no. of packages, order no, etc.) correspond to what is contained in the
delivery documentation;
- the technical rating plate data on the label applied to the UPS correspond with the material described in the delivery
documentation;
- the documentation accompanying the equipment includes the installation and user manuals.
In case of discrepancy, immediately inform the LEGRAND Technical Support Service before commissioning the equipment.
4.2 Unpacking
To remove the packaging material, comply with the icons on the outside of the box and observe the following procedure:
1. cut the wrapping material and open the plastic packaging safety holds;
2. open the top of the box;
3. remove the upper protection;
4. remove the four protective corners;
5. remove the packaging container pulling it upwards;
6. remove the pallet and the front/rear bracket from the UPS by undoing the four fixing
screws present;
7. examine the UPS for any damage. Immediately inform the shipper and the supplier
in the case of apparent damage.
Keep the packaging material for any future shipment.
The package can be fully recycled.
4.3 Check of the content
The content of the supply is subject to thorough checking before the shipment; nonetheless it is always advisable to
check that it is complete and in order on receiving the material.
The following list is general:
- 1 Trimod HE UPS;
- 1 envelope of accessories containing washers for the contact with the earthing, set of screws for fitting the panels, two
eight-pole terminal strips, a serial cable and fuses (the latter are only included on models with internal batteries);
- 1 envelope of accessories containing one or more EC15 connectors according to the model and connecting jumpers for
the terminal strip (ONLY for Trimod HE 10, 15, 20 and 30 TM);
- 1 front closing panel;
- 2 base strips for side closing;
- user manual;
- acceptance report;
- quickstart and installation and maintenance manual.
Should there be defects and/or missing material, immediately inform the LEGRAND Technical Assistance Centre before
commissioning the equipment.
CAUTION
The quickstart and the installation manual must be used and consulted by SKILLED TECHNICIANS only.
INDICATION
When purchasing empty cabinets, the power modules and any battery drawers to be installed must be purchased
separately.
4. Unpacking and positioning