Chapter 2: Installation
8
Computer Connection
One-tier Connection
•
Plug the MDCIM or MDUTP cable's USB connectors into one of the
computer's USB ports.
•
Plug the MDCIM or MDUTP cable's video connectors into the computer's
video ports.
•
Optionally, plug the MDUTP cable's audio connector into the computer's
audio output port.
•
Connect the MDCIM to MCD-DUAL by using a standard network patch
cable (Cat5e/6 UTP). The MDUTP is combined with a standard network
patch cable; you can use it to connect with MCD-DUAL directly.
•
Repeat the above steps to connect more computers.
Note:
Please make sure the MDCIM or MDUTP must connect to the same channel of
MCD-DUAL.
The signals of USB keyboard/mouse and audio are transmitted via "RJ45 Port A"
only.
For single-monitor connection, please make sure the MDCIM or MDUTP must
connect to" RJ45 Port A".
For both single-monitor and dual-monitor connections, please make sure the
computer’s audio output is set for the MDCIM or MDUTP which is connected to
"RJ45 Port A".
Summary of Contents for Raritan MasterConsole MCD-104-DUAL
Page 14: ...Chapter 2 Installation 10...
