LEGRAND PX2 Quick Setup Manual Download Page 9 | Manualshive

Page: 9 / 9

background image

PXC_PXO Quick Setup Guide

9

PXC_PXO_QSG_A1_4.0.10



255-80-0059-00 RoHS

Threaded Grounding Point

Some models have a threaded grounding point. Identify it via the grounding symbol:

Wire this point to an electrical system to protectively ground the PDU.

Additional Information

For more information about PXC/PXO and the entire Raritan product line, see Raritan's website (www.raritan.com). For technical issues, contact Raritan Technical Support. See the
Contact Support page in the Support section on Raritan's website for technical support contact information worldwide.

Raritan's products use code licensed under the GPL and LGPL. You can request a copy of the open source code. For details, see the Open Source Software Statement at
(https://www.raritan.com/about/legal-statements/open-source-software-statement/) on Raritan's website.

«
...
7
8
9

Summary of Contents for PX2










Reviews:

No comments

Related manuals for PX2

Brand: P.Lindberg Pages: 38

Brand: DVIGear Pages: 4

Brand: Raritan Pages: 442

Brand: Walther Systemtechnik Pages: 19

Brand: Vertiv Pages: 20

SIPROTEC 7SS522 V4.6

Brand: Siemens Pages: 440

Alpha C016-2121-10

Brand: EnerSys Pages: 22

Brand: CTC Union Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands