www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United Stateswith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
2
INSTALLATION INSTRUCTIONS
LPS_F-5290_090418
4. After the Drywall has been installed, cut a rectangular hole ( recommended hole 3-3/8" x 9" ) and insert the
mounting-housing making sure that the hooks on housing are pointing up. Attach housing to back-box using
the four (4) 1.5" screws provided with the fixture.
Brackets
Hanger bars
Back-box
Knockout
Screws
a-b
c
Studs
Screws
(Supplied
by others)
3. Mount Back-box and Hanger Bars.
a. Remove knockouts as needed.
b. Mount back-box to hanger bars using the screws and brackets supplied with the fixture.
c. Install hanger bar assembly. Use four screws per hanger bar (supplied by others).
Note: Remember to use non-ferrous hardware when installing MRI fixtures.
Back-box
Cutout
Drywall
Drywall
Hooks
1.5" Screws
Mounting-Housing
3.375
9.000
