www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
3
INSTALLATION INSTRUCTIONS
F-4541
1.
Remove refractor/ reflector per Figure 1.
2.
Feed wires through the ¾" diameter rigid pendant stem (by others).
3.
Connect threaded hub to the ¾" diameter rigid pendant stem (by
others) and attaching the other end to upper structural.
4.
Undo lock nut and slide housing/ cover up.
5.
Install safety aircraft cable per Figure 2.
6.
Slide housing/ cover down and tighten lock nut.
7.
At the junction box (outside the luminaire), Wire leads to power
supply leads using connectors suitable for the gauge and number
of wires being used. Black fixture lead connects to the supply
conductor, white fixture lead connects to the neutral supply
conductor, and the grounding wire must be connected to a suitable
ground.
8.
Install lamp(s) if applicable
9.
Re-install refractor/ reflector.
PENDANT MOUNT INSTALLATION – (320M-400M ONLY) PM (FIGURE 5)
* Wrap plumbers tape around stem thread
before, screwing into fixture hub
*
For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties
For technical assistance, call 1-800-4KENALL (1-800-453-6255).
WARRANTY
CUSTOMER SERVICE
FIGURE 5
