Galea life
TM
Multizone sound distribution system
Cat. No(s).: 7756 66/67/68
Technical data sheet: F00736EN/00
Updated:
Created: 19/06/2009
2/4
4. FITTING
(cont’d)
4.2 Mounting
Example: 7756 67
Once the fllush-mounting box has been fitted, follow these steps:
- wire the products (following the guidelines given in the operating
instructions),
- fix the support frame-mechanism assembly onto the flush-mounting
box or surface-mounting frame using claws or screws,
- position the frame plate (not supplied) on the support frame-mecha-
nism assembly,
- clip the cover plate (not supplied) onto the mechanism.
* Exampe of a 2 x 1-gang installation to illustrate the combination of
local control unit + tuner.
3. OVERALL DIMENSIONS (mm)
(cont’d)
7756 68
4. FITTING
4.1 Fixing method
Vertical or horizontal multi-gang mounting.
To ensure the support frames are properly aliged, a flat-blade screwdri-
ver has to be inserted in the notches shown above. This operation ensu-
res correct mounting of the frame plate and cover plates.
Screw mounting:
- The mechanisms can be fitted directly in any flush-mounting box for dry
partitions, masonry or concrete with a min. depth of 40 mm.
- The mechanisms are fitted directly onto surface-mounting frames from
the Galea Life range (7710 96, 7710 97, 7710 98).
Claw mounting:
- The mechanisms can be fitted directly in any flush-mounting box for dry
partitions, masonry or concrete with a min. depth of 40 mm.
27.7
12.8
60
71
60
71
> 40 mm
> 40 mm
7756 67
7756 68
7756 68
7756 67
100 mm
100 mm
90 mm
7756 67
7756 68
